Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32

Mostrar en Amazon

Oferta

Descripción del producto

  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi Jetson Nano Arduino STM32)

Puede que también te interesen estos placas arduino nano.

© 2025 WHICH.ONE. TODO EL CONTENIDO ESTÁ SUJETO A NUESTRO COPYRIGHT