Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield Hat with Pin Header, GPIO Status LED, 5 V 3.3 V

Mostrar en Amazon

Oferta

Descripción del producto

  • Compatible Models Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin) (Compatible with Arduino Nano Micro, Raspberry Pi Pico 1 2 (W), ESP32, ESP8266)
  • Power Supply If using DC input (6 24 V), can provide 5 V and 3.3 V power (DC-DC circuit, up to 3A); otherwise, can use the power of the main board (Need to configure jumper caps, please refer to the tutorial)
  • GPIO Status LED LED on if GPIO outputs inputs high level, LED off if GPIO outputs inputs low level
  • Independent LED The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch

Puede que también te interesen estos freenove raspberry pi picos.

© 2025 WHICH.ONE. TODO EL CONTENIDO ESTÁ SUJETO A NUESTRO COPYRIGHT